AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
![]() ![]() Individual products may be subject to a variation in performance. NOTE: MI WINDOWS AND DOORS' designs and manufacturing methods are continually being improved. Installer should make final adjustments to ensure proper sash operation and window performance. Manufacturer’s recommended installation procedures are to be used. Frame must be installed straight, plumb and level, without twisting, bowing or springing. They are not intended to prevent people or objects from exiting the window or to provide security against forced entry.) ( NOTE: Insect screens are intended only to provide reasonable insect control. Screens shall meet ANSI/SMA standard 1004-87. Screen cloth to be made from 18x16 fiberglass mesh and held securely by flexible, vinyl spline. Screen to be made from roll-formed aluminum, 5/16” x 3/4” with a. All screws, clips, and other fasteners shall be made of non-corrosive materials compatible with reinforcements. One plastic tilt latch shall be used at each end of the sash top rail. Two sweep lock keepers to be fastened to the fixed meeting rail. Two metal camtype sweep locks to be located equidistant from each end of the top sash rail. Moveable sash balance mechanism to consist of stainless steel constant force springs. Bottom of moveable sash fixed meeting rail to contain one foam bulb. Sill insert shall have one strip of center fin weatherstripping. Movable sash shall have double strips of center fin weatherstripping on each stile and one on the top rail. Note: 7/8” thick insulated glass used on select configurations. Glass to be held securely in place with silicone and with rigid, extruded, vinyl, interior glazing beads. Moveable sash glass panel shall consist of 3/4” thick insulated glass. Note: 7/8” thick insulated glass used on select configurations. Low-E glass, argon gas and other glazing options available. Fixed (top) glass to be held securely in place by the use of a single-sided adhesive foam tape at the exterior and a rigid PVC glazing bead, which has a minimum wall thickness of. Top, or fixed, glass panel shall consist of 3/4” thick insulated glass. Inside joint between sill snap-in and main frame to be sealed. Sill insert to be sealed with double-sided foam tape before insertion. It shall “snap fit” into the main frame sill. ![]() Shall be made from rigid PVC with a wall thickness of. Bottom of meeting rail to have foam bulb to seal against the moveable sash. Meeting rail to have metal reinforcement. Meeting rail shall be secured to the main frame with three screw fasteners through injection molded end caps attached to the meeting rail with three screws. Shall be made from a rigid PVC hollow extrusion with a. Sash to have metal reinforcement in horizontal members. Sash to be of welded corner construction. Shall be made from rigid polyvinylchloride (PVC) extrusions which have a minimum wall thickness of. Main frame shall be welded together at the corners. Shall be made from rigid polyvinylchloride (PVC) multi-hollow extrusions which have a minimum wall thickness of. Continuous Head and Sill Mulling for Twins (Double Door – 6068).Steel reinforcement at meeting rail and sash horizontal.Easy sash and fixed glass removal for drywall pass through (up to 3/4 width).A closer look reveals details like a full-length lift rail and metal reinforcements at the meeting rails. With standard features that include a pre-punched mounting fin and easily removable sash, the 3500 window is designed for builders. It lets in more light and helps keep the heat out.ĮC/EC Advanced = Dual Low-E, high performance internal Low-E combined with 4th surface Low-E.ĮC+/ EC Advanced = Dual Low-E, Triple Coat internal Low-E with 4th surface Low-E, the best overall combination for low solar heat gain and the maximum reduction in u-value.Our high quality 3500 vinyl single-hung windows are durable and energy efficient The Advantage of Cascade Windows Glass CoatingsĮC = Dual Coat internal Low-E, high performance internal Low-E with more visual light transmittance.ĮC+ = Triple Coat internal Low-E, has been specially formulated to reject the sun's heat without affecting the view. Our specially coated EC and EC+ windows re ect outside heat in the summer and interior heat in the winter, reducing your air conditioning and heating requirements. Be sure to check the u-values on any window that you might be considering. Therefore the lower u-value, the lower the heat loss and the better your home is insulated. ![]() U-values measure the rate that heat transfers through a product. ![]()
0 Comments
Read More
Leave a Reply. |